22
C
1000S
Powering
Inserting/replacing and testing the batteries
1
2
3
Figure 2: Insert batteries
1)
Unscrew the wire-mesh cap (1).
2)
Insert two AA batteries into the battery compartment to conform with the
polarity marks (+/-).
If the batteries are inserted incorrectly, the microphone will not work.
3)
Screw the wire-mesh cap back onto the microphone.
4)
Slide the on/off switch (3) up to "ON" to switch power to the microphone
on.
The Status LED (2) will flash momentarily. If the batteries are in
good condition, the Status LED will extinguish.
If the Status LED fails to flash, the batteries are dead. Insert new
batteries.
If the Status LED lit constantly, the batteries will be flat within about
one hour. Replace with new batteries as soon as possible.
Battery power
