Operating instructions( 1)
1.
Click the "POWER" button, and the power lamp lights up 10S to display the power
information.
2.
Press the "POWER" button for a long time. When the red light is turned on, the
system is normal. When the red light is pressed again, the system is turned off.
3.
In the boot state, click the "DC ON", DC blue light, said USB A&TYPE C output port
open, can supply to the mobile phone and other 5V devices, while controlling the
flashlight and lamp lighting mode by different key mode
3.1 Double click open lamp lighting mode, lamp lighting in the open, click the DC ON
lamp light pattern: high bright
SOS cycle, double click again to close the
table lamp
3.2 press 3 seconds to open the flashlight flash light, and then press the flashlight for
3 seconds.
Note: in the case of no load, the output will be closed within 30-60 seconds
4.
In boot state, click "AC ON" and the AC green light is on, indicating that the
output of AC port is on, which can provide AC power to the equipment. When clicked
again, the AC light is off, indicating that the output is off.
AC output maximum power 300W, over 350W, the system will enter the protection state, need to remove
the load reboot
5.
DC 12V export support plug and play, can support within 36W load