•
The “Pair and Go” automatic
BMW Communication System WCS-1
BlueCom 102
BlueCom 102
Best always switch on the Bluetooth helmet set
and put on the helmet first
and then¹ the BlueCom 102 pocket repeater.
Activate helmet electronics
Activate headset mode
Activate solid connection
Disconnect helmet electronics
:
:
:
BlueCom
102 pocket repeater
:
Press Select/On/Off until green LED is
flashing (very fast)
Shortly press Select/On/Off, green LED is
flashing (slowly)
Shortly press button at the AKE
and wait until you hear the control signal in
the helmet, the LED is green (short activation of connection) and
shortly wait until the green light will flash again (disconnection).
Now shortly press Select/On/Off and when the LED is green, the
connection is permanently activated.
Press Select/On/Off twice
The
pocket repeater is developed to make it possi-
ble that after the first pairing and registering usually a reconnection
is made automatically, for example ...
- if the radio communication is clean again after an interruption
(e.g. due to exceeding the range or due to interferences)
- or simply after the
pocket repeater was switched
off and on again
13
ENGLISH
¹) When switching on the pocket repeater, it will search for a Bluetooth helmet set. It
will confuse the automatic if the Bluetooth helmet set is switched on later (or off
and on again).
