On time screen: Please set time that will raise steam for second time with the help of
buttons below screen.Thus, the you will specify how many minutes later steam will raise for second
time. Please set the value as “0” (zero) unless you prefer steam raising for second time.
On program screen : Please specify duration that raised steam for second time with
the help of buttons below the screen. Please set the value as “0” (zero) unless you prefer steam raising
for second time.
6.2 MANUAL PROGRAM
“P0” is manual program. The alterations that’s made by user momentarily save.Please alter the
temperature and time values with the help of arrows below the screens. Please touch the related
button to adjust Fan holding, steam settings and clack settings when you are in home screen.
7.DEVICE MALFUNCTION SITUATION
A01:
Card failure
Solution: Energy should be closed and reopened.In the case of lasting failure, the card should be
altered.
A02:
Card failure
Solution: Energy should be closed and reopened. In the case of lasting failure, the card should be
altered.
A03:
Thermocuple 1 is not installed or the temperature of area that is read by Thermocuple 1 is
more than 500
o
C.
Solution: Oven must be completely de-energised. Thermocuple connectio, resistance relay and
resistance contactor should be controlled.
A04:
Thermocuple 2 is not installed or the temperature of area that is read by Thermocuple 2 is more
than 500
o
C.
Solution: Oven must be completely de-energised. Thermocuple connectio, resistance relay and
resistance contactor should be controlled.
A05:
Thermocuple 3 is not installed or the temperature of area that is read by Thermocuple 3 is more
than 500
o
C.
Solution: Oven must be completely de-energised. Thermocuple connection, resistance relay and
resistance contactor should be controlled.
A06:
Thermocuple 4 is not installed or the temperature of area that is read by Thermocuple 4 is more
than 500
o
C.
Solution: Oven must be completely de-energised. Thermocuple connection, resistance relay and
resistance contactor should be controlled.
A07:
Internal temperature of Thermocuple 1 is more than 350
o
C.
Solution: Oven must be completely de-energised. Thermocuple connection, resistance relay and
resistance contactor should be controlled.
A08:
Internal temperature of Thermocuple 2 is more than 350
o
C.
Solution: Oven must be completely de-energised. Thermocuple connection, resistance relay and
resistance contactor should be controlled.
