TECHNICAL INSPECTION
Technical inspections should be performed regularly. Before servicing, the product
should be thoroughly cleaned to reveal any hidden damage.
Frequency
What should be checked? What should be done?
Remarks
General condition of
the product.
Check:
ź
the entire product for any visible damage,
cracks or mechanical defects,,
ź
if the product complete,
ź
if all bolts, screws, knobs, nuts and other
elements of the construction are
complete and tightened..
In case of any damage or defects,
discontinue the use of the product and
contact your Supplier/Distributor or the
Manufacturer.
Wheels and brakes.
ź
if the brake is blocking the spinning
wheel,
Check:
ź
if the wheels are properly mounted and if
they are not damaged,
ź
if the wheels are not dirty. If necessary,
clean the wheels.
In case of any damage or defects,
discontinue the use of the product and
contact your Supplier/Distributor or the
Manufacturer.
Fastening of
the construction elements.
ź
if the seat is properly mounted (if
applicable),
ź
if the elements securing the user are
properly mounted and if they work well (if
applicable),
ź
if all the moving parts are complete, work
properly, do not jam,
ź
if the wheels are properly mounted (if
applicable),
Check all the mechanisms of the product
a n d i t s m o v i n g p a r t s . C h e c k i n
particular:
ź
if the adjustment mechanisms of the
following elements work properly (if
applicable): headrest, backrest, seat,
abduction block, armrests, footrests.
In case of any damage or defects,
discontinue the use of the product and
contact your Supplier/Distributor or the
Manufacturer.
Upholstery elements.
ź
if the stabilizing straps, vests or safety
belts work correctly and do not unfasten
under pressure or when pulled.
ź
if the stabilizing straps, vests or safety
belts are not frayed or twisted and if the
buckles work properly,
ź
if there is any damage, tears, rips, loose
s e a m s o r d e f o r m a t i o n s o n t h e
upholstery elements,
Check:
In case of any damage or defects,
discontinue the use of the product and
contact your Supplier/Distributor or the
Manufacturer.
Before each use.
Once a week.
Product cleaning.
If the frame and upholstery get dirty (dusty,
muddy, etc.) during everyday use, wipe
them with a damp cloth without detergents.
Remove dirt (e.g. hair, food remains, etc.)
from the moving parts of the product.
The product should be cleaned when
necessary, but at least once a week. Do not
use any chlorine based cleaners or
methylated spirit. Before using the
product, check if the upholstery is dry.
KIDOO HOME
29
:
www.akces-med.com
'
+48 17 864 04 77
*
export
@akces-med.com
