8.pls attention: pls make sure keep open the bassinet on can
be up and down side(as show 8-1),then put all buckle on
playpen (as show 8-2)
6.Close the fabric cap of the second lock, by attaching the Velcro.
(as pic 6)
7.Pls insert the tube through on another side hole under the bassinet when
the spring is POP-UP is ok, another tube is same assembling
(as show 7-1 pic),then put the hooks on armrest(as show 7-2/3 pic)
9
(pic 9-1)
(pic 9-2 )
(pic 9-3)
8
(pic 8-1)
(pic 8-2)
6
7
(pic 7-1)
(pic 7-2)
(pic 7-3)
9.put the mattress within playpen, the soft side is upward
(as show 9-1)
Put the Velcro under the mattress through the holes in the upper bassinet
fabric cover, which position is below the Velcro belt
.(as picture 9-2)
Velcro will be together on backside to fasten the mattress
.(as picture 9-3)
10.Adjusted the position of the secon
d
layer:
Turn on the both side of buckle
(as pic 10-2)
, turn upwards middle of rail plastic and release the folding
lock position
(as pic 10-1)
, meanwhile press two buttons of below the two
corner and put down and it has three level
(as pic 10-3)
.
5
(pic 5 - 1 )
(pic 5 - 2 )
(pic 5 -
2 lock parts on rail)
