Fig. 1 7
RECORDING FROM MICROPHONES
STEREO RECORDING
Connect power cord and load a tape. New tape gives best
results.
(A) Turn on Power Switch.
( B) Set Track Selector to STEREO position.
(C) Set Jape Speed Selector and Equalizer to desired
speed.
(I)) With Reset Button, set Index Counter to ‘*0000”. This
Index Counter provides an easy reference tor locating
positions on the tape.
(E)
Insert microphone plugs into Microphone Jacks.
Maintain a distance of at least 2 meters <7 ft.) between
microphones.
(F) Set Pause Lever to PAUSE position.
(G) Adjust and balance microphone volume with left and
right Recording Level Controls while observing left and
right VU Meters. Normal recording should not exceed
“0" VU on either of the respective meters.
(H) While holding the Recording Safety Button at de
pressed position, set Playback/Record Lever to REC
position. The Recording Indicator Lamp will light
indicating recording mode.
(I) When an optimum recording level has been determined,
depress Start Button to release Pause Lever and begin
recording.
MONAURAL RECORDING
Only the left channel is used for monaural recording
Substitute the following stops for steps B, E and G of stereo
recording procedure and add step K.
Tracks 1 and 4.
(B) Set Track Selector to 1-4 TRACK position.
(fc) Insert microphone plug into left Microphone Jack.
(G) Adjust and balance microphone volume level with left
Recording Level Control while observing the left VU
Meter.
(K) Invert reels to record on Track 4.
Tracks 3 and 2
(B) Set Track Selector to 3-2 TRACK position.
(E) Insert microphone plug into left Microphone Jack.
(G) Adjust and balance microphone volume level with left
Recording Level Control while observing the left VU
Meter.
(K) Invert reels to record on Track 2.
