Akai VS-K206M-E3, Руководство оператора

Страница: 15 / 28

13
CH 1
SEARCH :
/ F. TUNE :
MENU EXIT :
Manual TV station presetting
Manual station presetting
You activate the auto search function until your preferred station is tuned in. Then You memorize this station
into the chosen channel memory. For each station you repeat this procedure.
Example: Preset the SAT1 on program position 5.
1
2
CH TUNING
AUTO TUNING
CHANNEL SETUP
SELECT :
ENTER : ENTER
MENU
EXIT :
CHANNEL MAPPING
Press (rising frequency) or (falling
frequency) once. The search starts. It stops at
each broadcast automatically (" " change to
" "). Press or repeatedly until
the SAT1 appears. Only in case of receiving of
the weak broadcast
(drifting picture),
search does not stop.
If you want to stop,
press / or
/ .
3
Turn on the TV, and select the AV-program position on TV.
Preparation
Press or
repeatedly
until the dot before CH
TUNING blinks. Then
press ENTER.
Press MENU.
Press or
repeatedly
until the dot before
CHANNEL SETUP
blinks. Then press
ENTER.
TIMER REC SET
VCR EXTENSION
CHANNEL SETUP
SYSTEM SETUP
SELECT :
ENTER : ENTER
MENU EXIT :
SHARPNESS
The Auto CH Memory function(See page 11) memorizes all broadcasts to the suitable CH positions
by where you done this function.
However one broadcast may not be memorized depend on the bad receiving condition. In case of
these broadcast, use this Manual tuning function.
CH 1
SEARCH : / F. TUNE :
ENTER OK :
MENU EXIT :
DEC OFF
CH 5
CH :
ENTER OK :
MENU EXIT :
/ 0–9
DEC OFF
4
If the picture is not satisfactory press or
5
Repeat the steps 3 and 5 to preset other TV
stations.
6
Press or
repeatedly
until "5" displayed. Or
enter 5 with 10
number button.
Then press ENTER.
7
Press MENU repeatedly until the TV picture
appears on the screen
Note:
Occasionally, the auto search might catch a weak
signal and stop. If the TV station signal is weak, you
shouldn't store this station.
In that case restart the auto search using
or
.
until the best
picture is achieved.
Then press ENTER.
4F37001A (E)P10-15 5/6/2002, 16:41 13