3. Strobe
Indicators
The PLATTER has four rows of indicators. These
indicators are used to visually detail various stages
of pitch. The indicators are illuminated by the
STROBE INDICATOR PILOT LAMP. Each row
may appear to stand still at different pitch levels.
Note:
The use of heavy fluorescent lighting directly
above the turntable will defeat the STROBE LAMP
PILOT LAMP affect indicator accuracy.
4. Center
Spindle
This spindle holds the turntable PLATTER records
stable and centered.
5. Strobe Indicators Pilot Lamp
This is lamp specially designed to pulse a beam of
light at the STROBE INDICATORS on the turntable
PLATTER. This will give the illusion that indicators
are not spinning at certain speeds.
6. Power
Switch
This is a rotary power switch. To turn main power
on turn the switch in a clockwise direction. To turn
main power off turn the switch in counterclockwise
direction.
7. Start/Stop
Button
This over sized push button controls platter motion.
When the unit is turned on the platter will not
automatically begin to spin. Pressing the button
once will engage the high torque motor and spin
the platter, pressing this again will stop the platter.
8. Headshell
The included HEADSHELL is used to connect your
stylus with the tone arm.
9. Headshell Locking Nut
After attaching the headshell to the tone arm, this
locking nut will securely hold the headshell to the
tone arm.
10. S-Shaped Tone Arm
The tone arm is the mechanism that holds the HEAD-
SHELL and stylus allowing it to glide across a record.
11. 33-RPM Speed Select Button
Engaging this button will rotate the platter at 33
revolutions per a minute (RPMs). A function LED
will glow when this function is activated.
12. 45- RPM Speed Select Button
Engaging this button will rotate the platter at 45
RPMs. A function LED will glow when this function
is activated.
13. Pitch Control Slider
This slider is used to adjust the playback pitch
percentage (platter speed).
14. Tone Arm Lever
This lever is used to safely elevates the tone arm
above a record surface without endangering a
records surface
.
15. Tone Arm Clamp and Rest
Use this rest to safely hold the tone arm in position
during non-use and transportation.
16. Anti-skate Knob
The anti-skate applies inward force to the tone
arm to prevent outward skipping across the record
due to the centrifugal force cause by platter rotation.
The anti-skate value should be equally to that of
the stylus counterweight pressure.
17. Stylus-Pressure Ring
＊
The counterweight scale must face toward the
DJ.
18. Extra Stylus Holder
This cut out has been designed to safely store an
extra stylus headshell.
19. Counterweight
Use the counterweight to balance the tone arm and
to adjust the stylus pressure.
20. Hinge For Dust Cover
21. USB Socket (USB cable limit within 3m)
After connecting the Turntable to the computer via
USB, you can record your vinyl to hard disc using
the software.
22. Phono/Line Selector
This switch is used to change the mode of phono
output or line output
.
23. RCA output Jacks
The output is able to switch to PHONO output or
LINE output. For example: These jacks are used
to send a low voltage "phono" level output signal
to a mixers "phono" input jacks. Turntables should
be connected to “Phono” inputs on a mixer. The
red colored RCA jack represents the right channel
input and the white represents the left channel
input.
CONTROLS OVERVIEW
15
