26
Program Change Mode
A
Program Change
, often referred to as a
Patch Change
, is a MIDI message
from one device to another that causes the latter to switch to a new program.
Using Program Change messages, MPK225 can tell another hardware or
software device which sound to play. For example, if your MPK225 is
controlling a piano patch in your software or an external MIDI device, sending a
Program Change message from MPK225 causes it to switch to a synth patch.
MPK225 lets you send two types of Program Change messages:
•
Program Change:
This is a standard Program Change message (0–127) sent to your
software or external device, letting you switch between 128 different program banks.
•
Program Change with Bank Change:
This is a standard Program Change message (0–
127)
plus
a Bank Select
LSB
(Least Significant Bit) (0–127) and a Bank Select
MSB
(Most
Significant Bit) message (0–127). This gives you access to up to 16384 different program
banks. Your software or external device must support LSB and MSB messages to use
this feature.
To navigate Program Change Mode:
1.
Press
Program Change
to enter Program Change Mode.
2.
In each page of Program Change Mode:
•
Use the
Up Cursor
and
Down Cursor
buttons to move through the parameters on
the current page.
•
Use the
Left Cursor
and
Right Cursor
buttons to move between different pages.
•
Turn the
Value Dial
to change the currently selected value/setting.
Important:
These changes cannot be saved to your Presets or global settings. Once you
power off the MPK225 they will return to the default settings.
Each section of this chapter is dedicated to a specific Program Change and lists its editable
parameters.
For an overview of the available settings and parameters, see the
Appendix:
Mode
Parameters
section.
Содержание MPK225
Страница 1: ...User Guide English Manual Version 1 0...
Страница 44: ...akaipro com...
