SERVICE MANUAL
4
II. SUPPLEMENTARY INFORMATION
MPD16 Utility Software Installation
1. Double click on the Installer inside the folder named Utility on the CD-
ROM to let it boot up.
2. In the Installer Wizard window, click on "NEXT".
3. In the End-User License Agreement window, check on I accept the terms
in the license agreement, if you agree, and click on "NEXT".
4. Enter the user name and then click on "NEXT".
5. Check on Complete and then click on "NEXT". Do not check on Cus-
tom here, as this Utility software may not work properly .
6. Click on "Install". The installation begins.
7. Complete window appears when the installation is completed. Click on
"Finish" to finish it.
USB Driver Installation
After the computer is completely booted up, connect the MPD16 to the compu-
ter using an appropriate USB cable. The Windows will pop-up a prompt saying
that it has found the new hardware and its driver software needs to be installed.
Follow the on-screen instructions as you would install a new device, e.g. printer,
scanner, etc., to install the driver. The driver software for the MPD16 is inside
the folder named "Driver" on this CD-ROM. Specify this folder to load the file
from. After the driver has been installed, you need to restart your computer
before the MPD16 can be used.
System Conditions
OS: Windows 98/98SE, Windows Me, Windows 2000 or Windows XP
CPU: Pentium 166MHz or higher
Free disk space: 2MB or more
Display resolution: 800 x 600/ 16bit colors or higher
Windows 98/98SE, Windows Me, Windows 2000 and Windows XP are ei-
ther registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
All other product and company names are either trademarks or registered
trademarks of their respective holders.