Akai MFC42 Скачать руководство пользователя страница 29

Страница: 29 / 33

Chapter 5 Connections to Others

MIDI Sync

The connection via MIDI enables to sync the LFO speed/trigger timing of Envelope to the tempo of

MPC2000/XL.

MPC2000/XL setting

Set the MPC2000/XL to Master mode in MIDI/SYNC mode to send out the sync signal to the MFC42. Press

the [MIDI/SYNC] (9) key while holding the [SHIFT] key down to open the MIDI/SYNC screen.

Set the [Mode] on its right to [MIDI CLOCK].

.......................................................

Sync Out

(Out:A)

Mode:

MIDI CLOCK

Send MMC:OFF

MFC42 operation

Refer to “Control the cut-off cyclically with Groove Modulator (MIDI CLOCK SYNC)” section in Chapter 3.

Recording the settings and operation of keys and knobs on the MPC2000/XL

The data is recorded onto the sequence track of the MPC2000/XL.

Note: Select the empty track for this purpose. If the data is recorded on the track with other data, the

sequence data of the MFC42 will be mixed and become difficult to edit later on.

Recording the keys and knobs

As an example, we’ll change the Bass part sound on the Mono channel with the CUTOFF knob and record

its knob movement.

First, confirm the MIDI Receive channel of the MPC2000/XL is set to ALL in the MIDI Input window. The

ALL is the default setting. Set it to ALL, when necessary. The following illustration shows the MIDI Input

window of the MPC2000XL.

........................

......................................................................................................

....................................................................................................................................

MONITR

MIDI Input

Receive channel:

ALL

Prog change>seq:OFF

Sustain pedal to Duration: ON

Sustain pedal to Duration: ON
MIDI filter:OFF

MIDI filter:OFF
Type:NOTES

Pass?:YES

....................................................................................

1. Select the track to record

Since the tracks 1 and 10 are already in use for Bass and Drum part, select the track other than 1 and

10. Let’s use the track16, here.

2. Set the MIDI channel on MPC2000/XL and MFC42

The MIDI channel for the MFC42 and that of the MPC2000/XL for recording/playback track (track16)

must be the same. Set the MIDI channel to 16 for both MFC42 and MPC2000/XL.

The track and MIDI channels are set as Bass (Trk1, Ch1), Drum (Trk10, Ch10) and MFC42 (Trk16,

Ch16).

Содержание MFC42


































Результаты поиска

Содержание MFC42

Отзывы:

Похожие инструкции для MFC42

Бренды по названию

Популярные бренды

Akai MFC42, Руководство оператора

Результаты поиска

Содержание MFC42

Отзывы:

Похожие инструкции для MFC42

Бренды по названию

Популярные бренды