2. VCT 49xyI-F1
The VCT 49xyI-F1 is targeted to solve field and functional problems of the earlier VCT-I versions. For that purpose
some new registers were implemented. In addition workarounds used for VCT-I versions prior to F1 may not be
compatible.
The VCT 49xyI-F1 is pin-compatible to VCT 49xyI-D5.
Functional problems 50, 56, 57 and 58, 62, 64, 65, 66, 68, 69, 70, 71 have been solved. Problem 55 has been
solved but requires software initialisation. Field problems FP01, FP02 and FP03 have been solved, FP06 and FP07
are still under inverstigation. New features F19 and F20 have been successfully implemented.
Table 2–1: New features of VCT 49xyI-F1:.
Table 2–2: Field problems of VCT 49xyI-F1:
Table 2–3: Functional problems of VCT 49xyI-F1:
No.
Feature
Description
Ok
F19
Vertical Peaking
Additional mode for vertical peaking in 4H-combfilter allows switching
between 2H and 1H peaking filter. See new register VPM in section
2.1.2.
F1
F20
Fastblank Output
The fastblank signal of the TVT display generator is availbale as output
signal for LCD-Scaler applications. It can be programmed to the pin
PWMV, P11 and P21.
F1
No.
Problem
Description
Comment
Ok
FP06
VSP-AGC performance
Poor performance with some non
standard signals
hardware redesign in F2
FP07
Sync/H-PLL perfor-
mance
Poor performance with some VCR
tapes
hardware redesign in F2
No.
Problem
Description
Comment
Ok
73
FM Radio not working
root causes:
a) fast carrier recovery is automati-
cally always ON, but should be
OFF for FM-Radio mode
b) When switching to FM-Radio
mode the output frequency some-
times will not be set correctly
firmware redesign F2
workaround: s. 2.1.1.4. W3 & W4
F2
74
ITU656 Biterror
Bit errors on ITU656 output data
produce noisy and unstable picture.
metal fix F1
no workaround available
CIRCUIT DESCRIPTIONS