10
LINE IN & RADIO OPERATION
LINE IN OPERATION
USING LINE IN to connect an audio cable (not included) from the LINE IN socket on rear of the unit to the
external unit’s LINE OUT socket. Slide the CD/ RADIO/ AUX selector to AUX position. This will allow you
to broadcast the external unit’s sound through this unit’s speaker.
RADIO FUNCTION
1.
Press the ON/OFF button to turn on the unit, slide the CD/ RADIO/ AUX selector to RADIO position.
2.
Rotate the MASTER VOLUME control to desired sound level
3.
Press the SCAN button once/ twice to scan through radio frequencies.
4.
Press RESET button to reset radio to low end station, press SCAN button the unit will scan station
again.
5.
This unit has built-in FM antenna, which provides adequate reception in most areas. If the reception
is weak, turn the unit to improve reception.
