EN - 9
LIGHT EFFECT
Press LIGHT ON/OFF button once to switch on LED light effect. Press the button again to
switch off.
REPEAT (For both CD and CD+G discs)
During playback, to repeat the track currently playing, press the REPEAT button once.
The REPEAT LED will start to flash.
To repeat all tracks, press the REPEAT button twice. The REPEAT LED will light up
and stay lit.
To clear the REPEAT function, press the REPEAT button again. The REPEAT LED
will turn off.
Use this button to program and play back songs in a separated preselected order.
Step 1: Programming should be done in the stop mode only. Press the PROGRAM button
once the PROGRAM LED flashes, the track will show
Step 2: Press the SKIP buttons ( SKIP ) to select a desired track.
Step 3: Press PROGRAM button to confirm entry. You can repeat the same steps up to a
maximum of 20 tracks.
Step 4: Press PLAY button when you have completed programming and you are ready to
start singing.
Press the STOP button to clear all the programmed entries.
PROGRAM
BALANCE
Adjust the BALANCE control between the pre-recorded singer’s voice and the
music when using a multiplex karaoke disc.
AUTO VOICE CONTROL
AUTO VOICE CONTROL can be activated and adjusted by the AVC control knob.
The vocals on the Multiplex recording will be muted when the singer starts to sing through
the microphone. When the singer stops singing, the vocals will resume to normal.
MASTER VOLUME
RANDOM
MIC VOLUME
ECHO
Rotate to the MASTER VOLUME control to obtain the desired sound level.
Press RANDOM button to start playback CD/CDG randomly. Press RANDOM button again
to go back to normal playback.
KARAOKE FUNCTIONS
Sing-along with the music by plugging in the provided microphone into either one of the
microphone jacks on the unit.
Adjust the MIC VOLUME control to a desired level and obtain the best performance.
Adjust the ECHO control to enhance your voice for a concert hall effect.