Akai GL703-BT, Инструкция по эксплуатации

Страница: 9 / 10

TROUBLESHOOTING GUIDE
Symptom Possible Problem Solution
The unit does not
respond (no power)
The unit is disconnected from
the AC outlet.
Reconnect to the AC outlet.
The AC outlet has not power. Try the unit on another outlet.
Unit is ON but there
is low or no volume The volume control has been
turned all the way down. Turn the Volume control to a
higher output.
No sound when
playing audio via
Bluetooth.
Your Bluetooth device has
been paired properly.
Pairing your Bluetooth device
according to the ”LISTENING TO A
BLUETOOTH ENABLED DEVICE”
section.
The volume control of your
Bluetooth device is set at too
low.
Increase the volume of your
Bluetooth device.
The volume control of main
unit is set at too low. Increase the volume of main unit
to adjust to “+” level.
distorted on FM
broadcast
FM.
The FM rod antenna is not fully
extended.
Fully extend the FM rod antenn
a
.
Sound is distorted
Volume level is set too high. Decrease the volume.
Sound source is distorted.
If you are using an external sound
source like older generation of
iPod, try reducing the output
volume on the device itself. Also
try turning bass boost OFF or
change the EQ setting.
U
FM no reception
nit gets warm after
extended play at
high volume This is normal.
Turn the unit off for a period of time
or lower volume.
• Under the influence of
electrstatic phenomenon, in
case the product may
malfunction we suggest user
to power reset
• Disconnect the machine from the
power source for 30 seconds then
reconnect
Noise or sound
Station not tuned properly for Retune the FM broadcast station.
8