•
The fan can operate in oscillation or static mode.
•
To make the fan head oscillate, push down the Oscillation Knob.
•
To stop the fan head from oscillating, pull-up the Oscillation Knob.
•
The head of the fan can be adjusted up or down, to do this loosen the adjusting
knob, adjust the fan to the desired angle, to secure tighten the adjusting knob.
PART NAME:
1. Screw Nut 2. Front guard 3. Blade 4. Position screw 5. Rear guard
6. Power switch 7. Oscillation Knob 8. Motor 9. Power cord
10. Tube 11. Joint screw 12. Base Addition part 13. Base
ASSEMBLY:
If your fan comes ready assembled
ignore this part.
1
After removing everything from
the carton, locate the motor unit
(item 8) and separate the front guard
(item 2) and back guard (item 5) if they
are connected.
2
Locate the rear guard (item 5) and
align with 4 protruding indents on
the motor unit (item 8). The safety
grille will only fit one way over the
pro-truding intents with the handle
facing up. insert 4 locking screws (item 4)
and tighten to secure the rear guard to the motor unit.
