Akai DV-P4330S, Руководство оператора

Страница: 12 / 37

9
Connect the red pin of the audio wire to the audio right channel, the re d socket of this player. Connect the
white pin to the audio left channel, the white socket. Then connect other sides of the wire to the corresponding
socket of the am plifier. To avoid damage to the amplifier and the speakers, please adjust the volume of the
amplifier to mi nimum, and th en turn on th e player before operation. When the m achine works normally,
adjust the volume of the amplifier according to your requirement. (Please refer to the illustration
¢Ú
below for
correct connection)
4.2 connecting to a 2 channel audio amplifier
£´£®
CONNECTING TO THE A&V SYSTEM
4.1 connecting to the A&V part of a two channel TV Set
Connect the y ellow pin of the AV wire to the yellow socket of this player and connect the other side of the
AV wire to the yellow video input socket of the TV set. If your TV has a S-Video output socket, please use the
special S-Video wire to connect the S -video socket of this player and the TV set to acquire better video quality.
Connect the red and the white pins to the corresponding sockets of th e same colour of the player and TV set.
(please refer to the illustrations below)
¢Ù
Note: No matter the VIDEO output is INTERLACE-YUV or P-SCAN Y Pb Pr, S-VIDEO and CVBS
output can work at the same time.
¢Û
4.3 connecting to amplifier with digital audio input socket
Connect the coaxial or OPTIC output socket of this player with that of the amplifier with coaxial or OPT IC
transmission wire. The amplifier must have the AC-3/DTS decoding function, for better sound field effect.
(Refer to the illustration for correct connection.)
¢Ü
This player has the Y, Cb, Cr or Y, Pb, Pr output. If your TV set has the Y, Cb, Cr or Y, Pb, Pr please use three
video wires to connect the Y, Cr, Cb or Y, Pb, Pr output of the player to that of the TV set. With this method of
connection, you may enjoy high quality picture of your DVD discs. ( refer to the illustr ation , connecting Y,
Cb, Cr or Y, Pb, Pr output of DVD player with that of the TV set.)
Note: 1. In interlace output
, the output will be Y Cb Cr;
2. In progressive output status, the output will be Y Pb Pr.
status
4.4 Y, Cb/Pb, Cr/Pr output
DV-P4330S
¢Ý
4.5 SCART output
The player can be connected to the common standard SCART computer display and other devices, the
high resolution computer display enables you to enjoy a nice quality of the DVD disc pictures. (Refer to
illustration picture SCA RT output of DVD SCART outlet of computer display).