GENERAL OPERATION
1
、
POWER[On/Off]
Plug in the supply socket, and press the MAIN POWER SWITCH key on the TV. You may press any of the
STANDBY, Program Number (0-9) and CH-/+ keys on the remote control to turn on the TV.
To switch back to the Standby mode, press STANDBY key. You can also power off the TV directly by pressing
the MAIN POWER SWITCH key. Part of circuit on the TV remains active in the STANDBY mode. To cut off the
power off completely, please press the MAIN POWER SWITCH.
Auto off without signal received
When there is no signal received (for example, the program of a certain channel is over), the TV will switch to the
Standby mode if no key is pressed within 5 minutes. If you have set "Off Time" and the remaining time is less
than 5 minutes, Off Time will be carried out prior to AUTO OFF. At the last 5 minutes, it will hint per-min;
and at
the last 1 minute, it will hint per-sec on the screen.
2
、
Num Keys
a.
To select channels
;
b.
Press any number button to reset TV when it is standby,and the TV will turn to the right channel as the
number.
c.
Press the number button to change AV mode to TV mode.
d.
Input the page of sub code in txt mode.
e.
Input the channel frequency in tune menu.
f.
Input the password of the Hotel mode.
3
、
[CH+/-]&[VOL+/-]
Press CH[+/-] to switch channels; Press the VOL-or VOL+ button to decrease or increase the volume. Adjustable
range: 0-63
During normal play, press the MUTE button and the sound is eliminated. The TV will display a picture
on the
screen. To cancel MUTE, you may press the MUTE button again or the
VOL+ button.
4
、
TV/AV Selection
In the TV mode, press the TV/AV button to enter the AV mode. In the AV mode, the TV receives AV signals from
external equipment. To resume broadcast viewing, press the TV/AV button
,
CH-/CH+ buttons or Num keys.
To receive signals from external equipment, please select the relevant AV mode. In the hotel mode, if “AV lock” is
ON, there will be “locked” displayed on the screen when switch to AV mode.
5
、
Channel Selection[-/--/---]
Pressing the CH-/CH+ buttons can select another lower-numbered or upper-numbered channel.
Direct selection
:
To select a one-digit channel number
Press the DIGIT button to choose "-" firstly, then press one of 0-9 buttons.
To select a two-digit channel number
Press the DIGIT button to choose "--" firstly, then enter a first-digit and second-digit. If only one digit is entered,
the channel will automatically shift to the digit related channel in three seconds.
To select a three-digit channel number
Press the DIGIT button to choose "---" firstly, then enter a first-digit, second-digit and third-digit. If only one or two
digits are entered, the channel will automatically shift to the digit (digits) related channel in three seconds.
Note:
If you enter a number over 235, the channel will remain the current one.
6
、
MUTE
Press the MUTE button to switch MUTE ON/OFF modes. The “MUTE ON” mode will display
on the screen.
When there is no signal received in TV mode,the TV will be in MUTE ON mode.and there will be no sound output.
7
、
PICTURE MODE
There are 4 picture modes to select. Press this button to switch user
Î
soft
Î
nature
Î
rich.
And the user mode can be regulated in the PICTURE MENU.
8
、
DISPLAY
The displayed parts include the Signal Source; Color Sys;Sound Sys and so on.
9
、
MENU
Press the MENU key and the main menu will display on the screen.To stop searching,you can press the MENU key.
4
Содержание CT-2107ASF
Страница 32: ......