7
8
CONNECTING TO AC POWER
Before using your Bluetooth speaker, you should connect it to AC (mains) power.
1. Plug the AC/DC adaptor into the AC (mains) power socket outlet.
2. Plug the DC power cord on the AC/DC adaptor into the DC IN jack of the unit.
When the unit is not operated by the AC power or unused for long periods of the time, please remove
the power adapter from the wall outlet and unplug from the main unit.
PAIRING YOUR BLUETOOTH DEVICE
After powering on your unit, you can start pairing process to connect to your Bluetooth device.
If it is the first time setup after purchasing, the STATUS indicator will flash RED and BLUE alternative
-ly to ask for pairing. BLUE / RED flashing indicates pairing attempt is in process.
Turn on Bluetooth functionality on your device and make it discoverable (see your device’s instruc
-tions to add or setup a Bluetooth device).
1.
2.
3.
NOTE:
The pairing time might be longer for the first time pairing or pairing a new Bluetooth device.
Due to different operating system of Bluetooth devices, the time taken by pairing process might be
different. If the pairing cannot be successful in the first time, please try to restart the pairing process
by pressing and holding the
button again until the indicator light flashes red and blue
alternatively.
Make sure you have the latest firmware for your Bluetooth mobile devices.
Make sure your device is working properly. Check your device’s manual for details on Bluetooth
pairing and linking.
PLAYING MUSIC VIA BLUETOOTH
To listen to music streamed wirelessly from your paired Bluetooth device.
Start the audio playback and adjust the volume output on your Bluetooth device.
Press and release the
Button to pause the audio playback from your Bluetooth device and
press and release this button for resume the playback. You may also pause and resume the
playback on your Bluetooth device.
NOTE:
It is not recommended to pause the audio playback by press and release the Button
on the unit and then resume the playback on your Bluetooth device as it may have abnormal
response for some Bluetooth devices.
Use the /- Buttons on the unit to adjust volume.
When done listening, press and hold the
Button for 2 seconds to turn the unit off (switch to
standby mode).
1.
2.
3.
4.
5.
Following the “pairing your bluetooth device” section to connect your Bluetooth device.
POWERING ON/OFF THE UNIT
1. After connecting the AC Power, the STATUS indicator would light up in RED to indicate the unit is in
standby mode.
2. Press and hold the “ ” button for 2 seconds to turn on the unit.
3. After using the unit, pressing and holding the “ ” button for 2 seconds to switch the unit to standby
mode.
NOTE:
If the unit is idle for 2 minutes after being powered on, it will be switched to standby mode automatically.
To begin pairing with a Bluetooth device
Select CE7200 on your Bluetooth device to make the pairing when it is found. If your device asks for
a password, enter 1234 on the keyboard of your device. If no device is paired till 2 minutes, the unit
will power off (switch to standby mode) accompanying by a long beep. If this occurs, retry step 1 - 4.
4.
Once paired with a device, a blue light on the STATUS indicator will glow steadily and two beep
sound confirms that pairing is completed. On some devices, you must then select “use as a stereo
audio device” or similar on the device’s Bluetooth menu. Once paired, your device should connect to
the CE7200 whenever within the range.
5.
To connect previously paired Bluetooth device
Your Bluetooth speaker can store one previously paired device for quick pairing during power on.
1.
To connect a previously paired device after power on, if the previously paired device is found with
the range, the unit will pair the device automatically and the STATUS indicator will turn to BLUE
steadily. Two beeps will confirm the pairing is completed.
2.
To connect a new Bluetooth device
If no previously paired device is found with the Bluetooth range (10 metres) after power on, the
STATUS indicator would continue to flash in BLUE for 2 minutes before switching to standby mode.
1.
During this period, you can pair a new Bluetooth device. You can start the pairing process manually
by pressing and holding the button on the unit until STATUS indicator would flash in RED
and BLUE alternatively again to indicate pairing attempt is in process. Please follow step 3 - 5 in
“To begin pairing with a Bluetooth device” section to complete the pairing of a new Bluetooth device.
2.
Содержание CE7200
Страница 1: ......
