Akai CE2300-BT Скачать руководство пользователя страница 3

NOTE: This digital apparatus does not exceed the Class B limits for radio noise emissions from digital 

apparatus as set out in the radio interference regulations of Industry Canada.

Le présent appareil numérique n

émet pas de bruits radioélectriques dépassant les limites applicables aux 

appareils numériques de Classe B prescrites dans le règlement sur le brouillage radioélectrique édicté par 

Industrie Canada.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, 

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 

harmful interference in a residential installation. This equipment generates, uses and can radiate radio 

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful 

interference to radio communications. However, there is no guarantee that interference will not occur in a 

particular installation. If this equipment does cause harmful interference to radio or television (which can be 

determined by turning the equipment off), the user is encouraged to try to correct the interference by one or 

more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit di

erent from that to which the receiver is connected.

Consult the dealer or an experienced / TV technician for help. 

1.   Read these Instructions.  
2.   Keep these Instructions.  
3.   Heed all Warnings.  
4.   Follow all instructions.  
5.   Do not use this apparatus near water. 
6.   Clean only with a dry cloth.  
7.   Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 
8.   Do  not  install  near  any  heat sources such  as  radiators,  heat  registers,  stoves,  or  other apparatus 

(including amplifiers) that produce heat. 

9.   Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two 

blades with one wider than the other. A grounding type plug has two blades and  a  third  grounding  prong. 
The  wide  blade  or  the  third  prong    are  provided  for  your safety.  When  the  provided  plug  does not  fit 
into  your  outlet,  consult  an  electrician  for replacement of the obsolete outlet. 

10. Protect  the  power  cord  from  being  walked  on  or  pinched  particularly  at  plugs, convenience 

receptacles, and the point where they exit from the apparatus. 

11. Only use attachments/accessories specified by the manufacturer. 
12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with  the

apparatus.  When  a  cart  is  used,  use  caution  when  moving  the  cart/apparatus combination to avoid 
injury from tip-over. 

Portable Cart Warning

13.  Unplug this apparatus during lightning storms or when unused for long periods of time. 
14.  Refer  all  servicing  to  qualified  service personnel.  Servicing  is  required  when  the apparatus  has  been

damaged  in  any  way,  such  as  power-supply  cord  or  plug  is damaged, liquid has been spilled or objects 

have fallen into the apparatus, the apparatus has been exposed to rain or moisture , does not operate normally, 
or has been dropped. 

EN - 2

Содержание CE2300-BT















Отзывы: