C) Connecting to mains
Before connecting the turntable to the mains socket, make sure that the power button (20) is
(OFF)
in position.
Ensure that the voltage selector (21) is set to the correct national voltage level
(230V or 115V).
The manufacturer is not liable for damage resulting from an incorrect setting of the voltage
selector.
Connect the mains cable to the power receptacle (19) of the turntable.
Make sure the input voltage selector (21) is set to
Ò230VÓ.
Plug the mains cable to a mains socket.
1.
2.
3.
The connecting device may be damaged, if the turntable was to be connected to a
magnetic-phono input while the switch is set to
ÒLINEÓ.
Connecting to computer
Connect the USB port (18) of the turntable to a vacant USB port of a computer via USB cable.
A software CD is included with an open source software, Audacity,
Licensed under the GNU General Public
License(GPL)
which can record and edit audio signal from USB signa
l
to computer.
For installation and opera
tion instructions and details please visit http://audacit
y
.sourceforge.net/.
-
-
B) Connection
Connecting to other audio devices
Connect the phono outputs (16) of the turntable to the phono inputs of an ampliÞer or a mixing
desk through the provided phono cable (red = right channel; white = left channel).
Depending on the type of phono inputs of the connecting device, the “PHONO/ LINE” selection
switch (17).
Set the switch to “PHONO” for plugging into magnetic-phono inputs of the connecting device.
Set the switch to “LINE” for plugging into CD/ AUX/ TAPE (line level) inputs of the connecting device
53
