Akai APR-350, Инструкция по эксплуатации, Страница: 3 / 34

OPERATING INSTRUCTION
DC (battery) Operation
Insert 2 x AAA cells (not included) into battery compartment and then close the
compartment door.
Note:
Check your batteries regularly. Old or discharged batteries should be replaced. If the unit
is not to be used for some time, remove batteries from the battery compartment to avoid
leakage.
Radio
1.
Select FM or AM wave band by switching RADIO BAND SELECTOR .
2. Adjust the sound level with using VOLUME .
3. Tune to a radio station with using TUNING .
To improve reception:
- For FM, pull out the telescopic aerial. To improve FM Reception incline and turn the
aerial, reduce its length if the FM-signal is too strong (very close to a transmitter).
- For AM, the set is provided with a built-in aerial, so there is no need to use the
telescopic aerial. Turn the set to find the best position.
Volume
Adjust the volume level with using VOLUME
You may connect headphones (not included) to 3.5mm HEADPHONE JACK . The
loudspeaker is then muted.
Avoid listening to headphones at high volume levels to prevent possible hearing
damage.
SPECIFICATIONS
Frequency range: AM: 530-1600KHz / FM: 87.5-108MHz
Speaker: 1.5 inches, 8-ohm dynamic speaker
Power Output: 0.5W RMS
DC Operate: DC 3V (2 x 1.5V AAA)
PRECAUTIONS:
1 . Do not leave the batteries in the compartment for a long time. Remove the batteries to
avoid leakage and damage.
2. Do not expose the unit to extreme temperature nor high humidity to ensure normal
functioning for a long lifetime.