Akai AKDVD7, Руководство пользователя, Страница: 13 / 28

OPERATION | 13
• Once fully charged you can disconnect the device from the charger, or leave the charger connected and
run the player on the mains electricity to save battery power.
• You can also recharge and run the player in the car with the supplied car power adaptor, which attaches
easily to the car’s cigarette lighter. The car adaptor can only support vehicles with 12V output. Larger
vehicles that may use 24V output are not supported.
NOTE: During playback, it is normal for the appliance to produce heat. Avoid using for an extended period of
time.
Turning the Player ON/OFF
Once the player is fully charged, or connected to an electrical outlet via the AC/DC power adaptor, slide the
POWER switch (on the right side of the player) to turn the player on. The indicator light will glow green. Switch
the power switch to OFF to turn off the unit.
DVD/CD Playback
• Gently press on the OPEN button to open the disc cover. Any protective sheeting under the disc cover
must be removed before first use.
• Place a disc with the playback side facing down and the label facing up and gently push on the center of
the disc to fix it to the spindle. The player will not recognise the disc if it is not inserted correctly.
• Close the disc cover. The disc will begin to play automatically. If this does not occur, press button.
• Pause: Press the button to pause playback. Press again to resume play.
• Stop: Press the button to stop playback.
• Forward/Rewind: Press the / buttons to fast forward/rewind. Keep pressing these buttons to increase
the speed. The max speed is 20x. Press PLAY to resume playing.