12
12
Wall Mounting Instructions
To attach the stand
To attach the stand, place the stand on the neck of the TV, insert and tighten the screws
in the circled area.
To remove the stand
To remove the stand, remove the screws in the circled area and the neck will c
.
Moun
ation:
200mm x 100mm using screw size M5 (not
supplied), length of screw should not exceed
10mm.
Please note:
the 10 mm length of screw refers
to how deep the screw can go inside the
mounting holes. When you are buying screws,
you should add the original 10 mm to the
thickness of your mounting plate in order to
get the total screw length.
The screws in the package are for securing the TV stand only. If you are mounting the
TV please consult a qu
ed installer for further instructions on bracket support and
wall support.
100mm
200mm
2
10
9
3
8
3
4
1
7
6
5
12
Connections and Functions
1.
Coax: Connect the S/PDIF receiver.
2.
HDMI1/2/3: Connect to the HDMI output socket of
a DVD player.
3.
YPbPr: Connect to the (Component) output socket
of a DVD Player.
4.
PC Audio: Connect to a PC’s Audio output socket.
5.
VGA: Connect to a PC’s PC-RGB output socket.
6.
RF: Connect the antenna.
7.
Video: Connect to a DVD player’s VIDEO output
socket.
8.
R/L: Connect the R/L AUDIO output socket of DVD.
9.
USB: Connect to portable USB storage device.
10. Headphone: Connect the earphone.
Front Connection of LED TV
Back View and Control Connections
1. Press “STANDBY” button to turn standby
mode ON or OFF.
2. Press “SOURCE” to select an input source.
3. Press “MENU” to bring up the main menu
4. Press “CH+” or “CH-” to scan through
channels.
Connections and functions
Front View
Back View & Control Connection
1. Press “STANDBY” button to turn standby
2. Press “SOURCE” to select the input source.
3. Press “MENU” to bring up the main menu
on the screen.
4. Press “CH+” or “CH-” to scan through channels.
5. Press ‘VOL+” or “VOL-” to increase or decrease
the volume.
6. POWER INDICATOR: Shows red in standby mode,
shows blue when your TV is switched on.
7. REMOTE SENSOR: Infrared sensor for the
remote control
9. USB: Connect to portable USB storage device
2. HDMI1/2/3: Connect the HDMI output jack of DVD
3. YPbPr: (Component) output jack of DVD
4. PC AUDIO: Connect the Audio output jack of PC
5. VGA: Connect the PC-RGB output jack of PC
1. Coax: Connect the SPDIF receiver
10.HEADPHONE: Connect the earphone
7. VIDEO: Connect the VIDEO output jack of DVD
8. R/L: Connect the R/L audio output jack of DVD
6. RF: Connect the antenna
2
10
9
3
8
3
4
1
7
6
5
6
7
5. Press “VOL+” or “VOL-” to increase or decrease
the volume.
6. POWER INDICATOR: Show red in standby
mode, show blue when your TV is switched
on.
7. REMOTE SENSOR: Infrared sensor for the
remote control.
Connections and Functions
1.
Coax: Connect the S/PDIF receiver.
2.
HDMI1/2/3: Connect to the HDMI output socket of
a DVD player.
3.
YPbPr: Connect to the (Component) output socket
of a DVD Player.
4.
PC Audio: Connect to a PC’s Audio output socket.
5.
VGA: Connect to a PC’s PC-RGB output socket.
6.
RF: Connect the antenna.
7.
Video: Connect to a DVD player’s VIDEO output
socket.
8.
R/L: Connect the R/L AUDIO output socket of DVD.
9.
USB: Connect to portable USB storage device.
10. Headphone: Connect the earphone.
Front Connection of LED TV
Back View and Control Connections
1.
Press “STANDBY” button to turn standby
mode ON or OFF.
2.
Press “SOURCE” to select an input source.
3.
Press “MENU” to bring up the main menu
4.
Press “CH+” or “CH-” to scan through
channels.
12
Wall Mounting Instructions
To attach the stand
To attach the stand, place the stand on the neck of the TV, insert and tighten the screws
in the circled area.
To remove the stand
To remove the stand, remove the screws in the circled area and the neck will c
.
Moun
ation:
200mm x 100mm using screw size M5 (not
supplied), length of screw should not exceed
10mm.
Please note:
the 10 mm length of screw refers
to how deep the screw can go inside the
mounting holes. When you are buying screws,
you should add the original 10 mm to the
thickness of your mounting plate in order to
get the total screw length.
The screws in the package are for securing the TV stand only. If you are mounting the
TV please consult a qu
ed installer for further instructions on bracket support and
wall support.
100mm
200mm
2
10
9
3
8
3
4
1
7
6
5
12
Connections and Functions
1.
Coax: Connect the S/PDIF receiver.
2.
HDMI1/2/3: Connect to the HDMI output socket of
a DVD player.
3.
YPbPr: Connect to the (Component) output socket
of a DVD Player.
4.
PC Audio: Connect to a PC’s Audio output socket.
5.
VGA: Connect to a PC’s PC-RGB output socket.
6.
RF: Connect the antenna.
7.
Video: Connect to a DVD player’s VIDEO output
socket.
8.
R/L: Connect the R/L AUDIO output socket of DVD.
9.
USB: Connect to portable USB storage device.
10. Headphone: Connect the earphone.
Front Connection of LED TV
Back View and Control Connections
1. Press “STANDBY” button to turn standby
mode ON or OFF.
2. Press “SOURCE” to select an input source.
3. Press “MENU” to bring up the main menu
4. Press “CH+” or “CH-” to scan through
channels.
Connections and functions
Front View
Back View & Control Connection
1. Press “STANDBY” button to turn standby
2. Press “SOURCE” to select the input source.
3. Press “MENU” to bring up the main menu
on the screen.
4. Press “CH+” or “CH-” to scan through channels.
5. Press ‘VOL+” or “VOL-” to increase or decrease
the volume.
6. POWER INDICATOR: Shows red in standby mode,
shows blue when your TV is switched on.
7. REMOTE SENSOR: Infrared sensor for the
remote control
9. USB: Connect to portable USB storage device
2. HDMI1/2/3: Connect the HDMI output jack of DVD
3. YPbPr: (Component) output jack of DVD
4. PC AUDIO: Connect the Audio output jack of PC
5. VGA: Connect the PC-RGB output jack of PC
1. Coax: Connect the SPDIF receiver
10.HEADPHONE: Connect the earphone
7. VIDEO: Connect the VIDEO output jack of DVD
8. R/L: Connect the R/L audio output jack of DVD
6. RF: Connect the antenna
2
10
9
3
8
3
4
1
7
6
5
6
7
5. Press “VOL+” or “VOL-” to increase or decrease
the volume.
6. POWER INDICATOR: Show red in standby
mode, show blue when your TV is switched
on.
7. REMOTE SENSOR: Infrared sensor for the
remote control.
5.
Press “VOL+” or “VOL-” to increase or decrease
the volume.
6. POWER INDICATOR: Show red in standby
mode, show blue when your TV is switched
on.
7. REMOTE SENSOR: Infrared sensor for the
remote control.
2