44
Built-in DVD Player Operation (Cont.)
CAUTION:
•
Only the types of disc listed below can be played on this unit:
DVD/CD/CDR/CDRW/DVD-R/DVD+R/DVD-RW/DVD+RW/VCD/SCVD.
•
A DVD-RW (video mode) can generally be played back, but not necessarily all DVDs of this
type: playback capability depends on the recording conditions.
•
A DVD-RW (VR mode) cannot be played back.
•
A DVD+R/+RW can generally be played back, but ot necessarily all DVDs of this type: playback
capability depends on the recording conditions.
•
A DVD-R that has recorded movie data can generally be played back on this unit, but not
necessarily all DVDs of this type: playback capability depends on the recording conditions.
•
A DVD-R without any recorded movie data cannot be played back.
Handing, Storing and Cleaning discs
•
Do not touch the door to the disc compartment while the disc is moving.
•
Never put anything except a 12cm DVD (or CD) into the disc slot. Foreign objects can damage
the unit.
•
Carefully wipe any finger prints and dust form the signal surface of the disc (glossy side) with
a soft cloth. Wipe straight from the centre to the outside of the disc.
•
Never use chemical cleaning spray, liquids or solvents to clean discs. These chemicals will
permanently damage the plastic surface of the disc.
•
To remove a disc from its storage case, press down on the center of the case and lift the disc
out, hold the disc carefully only by the edges.
•
Return any discs to their cases after use to protect them from dust and scratches.
•
To prevent warping the disc, do not expose it to direct sun light, high humidity or high
temperature for extended periods of time.
•
Do not apply paper labels or write anything on either side of the disc. Sharp writing
instruments, or the inks used in some felt-tip pens, may damage the surfaces of the disc.
DVD Setup
Once you have made your initial settings, you can always operate the unit under the same
conditions. The settings will be retained in the memory until they are changed, even if the power is
turned off.
Press D.SETUP to activate the DVD player OSD menu.
Press
/
button to highlight and move between different sub-menus, the press
button to
enter the submenu.
Press
/
button to move the highlight to the item you wish to select, the press
button to
enter. Press
/ / /
button for adjustments and press OK button to confirm settings.
Press
button to return to previous level menu.
Press D.SETUP to exit the OSD menu.
Содержание AK22FLEDCG
Страница 3: ...3 Contents Specifications 49 Care and Maintenance 50 Responsible Disposal 50 FAQs 51...
Страница 53: ...53 Notes...
Страница 54: ...54 Notes...
Страница 55: ...55 Notes...
