manualshive.com logo in svg

Akai AK-HPD8S, Инструкция по эксплуатации

Поделиться
Скачать
Akai AK-HPD8S Скачать руководство пользователя страница 30

After Sales Support

 (AU) 1300 886 649  (NZ) 0800 836 761  |       [email protected]

30

Other Useful Information (Cont.)

Emptying the water container

The water container collects all the water from the condenser (unless you have 
the drain hose connected). The water container needs to be emptied after every 
drying cycle, the tank full 

SY-DH80S5UW-001  

SY-DH80S5UW-001  

 indicator will remind you to do so. This indicator will 

also illuminate if the water container is full while the dryer is in operation. Should 
that happen, the program will stop and a buzzer will sound. In order to continue the 
program, you must empty the water container first.
Holding the water container with two hands, pull it out of the dryer housing, tilt it over a 
sink and pour out the condensate water (Fig. 13).

Fig. 13

Insert the empty water container back into its space in the dryer housing.
To restart the program, press the 

Start/Pause

 button.

WARNING:

 

Do not drink the condensate water. Do not use the dryer without the water 

container.

Cleaning the filter drawer

Lint and fibres that could not be captured by the lint filter are blocked in the filter drawer, 
which should be cleaned after each drying process. It is located behind the maintenance 
cover and contains a two-level filter: a filter drawer sponge and a filter cloth. 
Place an absorbent cloth under the maintenance cover to catch any residual water.
Push down the locking latch to the maintenance cover. Unlock the 
fixer. Pull out the filter drawer (Fig. 14).
Remove any lint, fibres and textile threads from the filter cloth by 
hand or with a soft brush or cloth (Fig. 15).
When you notice a layer that may lead to clogging of the filter cloth, 
clean off the layer by washing the filter in warm water. Let the filter 
cloth dry thoroughly before installing it back in the filter drawer.
Wash the filter drawer sponge by 
hand to remove any fibres and lint 
from the surface. After washing 
the sponge, squeeze it by hand 
and remove the excess water. 
Thoroughly dry the sponge before 
reinstalling it.

Fig. 14

Fig. 15

Содержание AK-HPD8S

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды