After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | tempo.org/support
9
Installation (Cont.)
Electrical connection
•
WARNING!
It must be possible to disconnect the appliance from the mains power
supply; the plug must therefore be easily accessible after installation.
•
Before plugging in your new bar freezer, let it stand upright for at least four
hours
This will allow the refrigerant gases to settle into the compressor and reduce
the possibility of a malfunction in the cooling system.
• The appliance must be earthed. The plug of the power supply cord is equipped
with a contact for this purpose. Do not under any circumstances cut or remove the
third (earth) prong from the power cord. If the plug does not fit your outlet, consult a
licensed electrician for advice to have the outlet changed.
• Plug the unit into a dedicated, properly installed and earthed wall outlet. Ensure
that your outlet voltage and circuit frequency correspond to the voltage stated on
the appliance rating label.
• Secure the bar freezer’s supply cord behind the unit. Do not leave it exposed or
dangling to prevent injury and accidental disconnection from the power supply.
• Adjust the temperature control as described on page 10.
•
When first starting up, and after a period out of use, allow the unit to cool
down on the MAX setting for 2 to 3 hours (at least 4 hours in summer) before
placing frozen food in the bar freezer.
