Akai AK-269-TM Скачать руководство пользователя страница 4

4

4

After Sales Support

 (AU) 1300 886 649  (NZ) 0800 836 761  |       [email protected]

To reduce the risk of fire, electric shock or injury, always follow basic safety precautions 
and accident prevention measures when using this appliance, including the following:

Electrical safety 

•     Voltage: 

Plug the appliance in a 220-240V, 50Hz, properly earthed power outlet, which 

must be in good working order. Make sure your outlet voltage and circuit frequency 
correspond to the voltage stated on the appliance rating label. 

•    Power connection: 

Do not use an adaptor; do not use an extension cord. Plug 

the power plug directly into a separate power point that cannot easily be turned off 
accidentally, and that is easily accessible so you can switch it off when required.

•    Power cord: 

Do not kink or damage the power supply cord. Do not try to lengthen it. 

Do not use a cord that shows cracks or abrasion damage along its length or at either 
end. Any damage to the cord may cause a short circuit, fire and/or electric shock. If the 
power cord is damaged, it must be replaced by the manufacturer or its service agent.

•    

WARNING: 

When positioning the appliance, ensure the supply cord is not trapped or 

damaged.  

WARNING:

 

Do not locate multiple portable socket outlets or portable power supplies 

at the rear of the appliance. 

•   

 

WARNING!

 

The

 light bulb

 in this appliance (if supplied) is a special use bulb, which is 

only suitable for use with this appliance, it is not usable for domestic lighting. Do not 
use the appliance without the lamp properly installed. Do not touch the light bulb if it 
has been on for a long period of time, as it could be very hot. The interior lamp can only 
be replaced by authorised service personnel. Please contact our after sales support 
centre for a service if the lamp needs replacing.

•     Disconnection: 

Never unplug the unit by pulling the cord. Always grip the plug firmly 

and pull straight out from the power point.

•    

All 

electrical work

 for the installation must be carried out by a licensed electrician.

Important Safety Instructions (Cont.)

Usage conditions and restrictions

•    Domestic use only: 

This appliance is intended to be used in household and similar 

applications, such as staff kitchen areas in shops, offices, in farm houses and in 
other working environments, use by clients in hotels, motels, bed and breakfast 
establishments, other residential type environments and in catering and similar non-
retail applications. It is NOT suitable for commercial or industrial use. Do not use this 
appliance for anything other than its intended purpose, and only use it as described 
in this manual.

 

Do not attempt to alter or modify this appliance in any way. 

•    Usage restrictions: 

This appliance is not intended for use by persons (including 

children) with reduced physical, sensory or mental capabilities, or lack of experience 
and knowledge, unless they have been given supervision or instruction concerning 
the use of the appliance by a person responsible for their safety.

•     Children: 

Supervise children to ensure they do not play with the appliance. Close 

supervision is necessary when any appliance is used by or near children.  Never allow 
children to operate, play with or crawl inside the appliance. 

•    

WARNING!

 

Do not use any 

electrical appliances 

(such as ice cream makers) inside 

refrigeration appliances, unless they are approved for this purpose by the manufacturer.

Содержание AK-269-TM





















Отзывы: