Akai AHC1000, Руководство оператора

Страница: 15 / 29

VOLUME
DOWN UP
PRE/TUN
P-SCAN
SETUP REPEAT
VOLUME
+10
STANDBY
MUTE
OPEN/CLOSE
UP DOWN MEMO AUTO
DVD TUNER AUX
FM MODE
STOP
PAUSE PLAY
A-B
PROLOGIC STEP ZOOM RESUME
ENTER
PROG CH LEVEL
SLOW DISPLAY
TIME
N/P
SUBTITLE LANGUAGE ANGLE
MENU
TITLE
RDS
14
Positioning
1.Press TUNER button to select desired wave
band (AM or FM).
2.Press UP or DOWN button to find a station.
The frequency will change with each press.
When a station's signal is received, it will
appear in the display.
3.To lock on to a station quickly, hold the UP
or DOWN button for two seconds. The unit
will start automatic tuning. When a station
is found, automatic tuning stops.
4.
To add a station to memory, press the MEMO
button. The memory storage number will
blink for four seconds in the display. Press
MEMO again to store the station.
5.
To reduce noise when an FM-stereo program
has been received, press the FM button. The
word STEREO will disappear from the display.
The program is now heard in monographic
form, reducing the noise. To resume stereo
play, press the FM button again.
1.Press the AUTO button. The word AUTO
will appear in the display and the automatic
tuning mode is activated.
2.Stations will be stored in ascending order
until 50 stations of that particular wave band
have been saved. When a station is stored, the
memory storage number, as well as the station's
frequency, will flash for four seconds in the
display.
3.When the total number of stations reaches
50, in a particular wave's (AM or FM) memory,
no further station in that wave band will be saved.
To Play Preset Stations
1.Press the TUNER button to select the
desired wave band.
2.Press the PRE/TUN button.
3.Press any of the numbere buttons to
select the desired station's memory number.
For example, to play the station at memory
#5, simply press the 5 button; for memory
#17, press the 1 button followed by the 7
button.
4.Stations in the memory function may also
be accessed by pressing the UP or DOWN
button.
PLAYING THE RADIO
Automatic Tuning
This unit will store up to 50 individual AM or
50 individual FM radio stations in its memory.
Memory number
Wave band Station frequency
Basic function of RDS(radio data system)
1.Identify the broadcasting-station
2.Identify the program
3.Display the complex information
4.Time display
Operation:
RDS button can be applied while the signal
with RDS received from broadcasting station
and the station will be identified automatically.
You can check the time, complex information,
the program and frequency of the station by
pressing RDS button. Once the RDS signal
disappears the function should not be available.