16
SD/MMC functions
5.4
After the device has been connected, a content menu will display on the
TV screen.
● Press the arrow buttons (up and down) (14) to select a folder or a file.
● Press ENTER to enter the selected folder or to play the file. You can also
use the digit buttons (21) to select a folder or to play the file.
● Press the PROG button to switch between folders and files.
Press ENTER to confirm.
● Press the MENU button to return to the content menu during playback.
During playback, the following functions are available:
● To select a track, press the PREVIOUS button (38) or the NEXT button
(39) until the desired track is set.
● To pause playback, press the PLAY/PAUSE button (40) once;
to resume playback, press the button again.
● To stop playback, press the STOP button (32).
● To remove the device, gently pull it out of the slot.
General setup menu operation
5.5
This chapter explains a complete setup of the appliance: settings of screen
display, audio setup and video setup.
The following actions have to be carried out with the remote control.
● Press the SETUP button (12).
● Press the arrow buttons (left and right) (14) to select a submenu.
The submenu is displayed directly.
● Press the arrow buttons (up and down) to scroll through the submenu.
● Press the ENTER button (17) to select a setting, or the left arrow button to
cancel the selection.
● Press the SETUP button to store the settings and exit.
General setup page
● TV DISPLAY to set the aspect ratio. Select 4:3 PANSCAN or 4:3
LETTERBOX for a conventional TV set. Select 16:9 or WIDE SQUEEZE
for a wide screen TV set.
● ANGLE MARK to display the angle setting information.
Switch this function ON or OFF.