GB-9
OPERATION
PLAYING DISCS
1.
2. Close the DVD door, and the disc will be loaded automatically. Once loaded
.
PRE-STOP [ ]
3.
4.
(PAUSE) STEP [ ]
5. The PAUSE function is applicable to both DVDs and CD audio discs:
a.
b.
c.
d.
6.
a.
b.
DVD SETUP MODE
a.
b.
c.
If necessary, turn the unit ON with the Power Switch. The unit s Power LED should be
GREEN, indicating that the battery is not in need of a charge. The unit will attempt to
load a disc if one is present under the disc cover. Press the PUSH TO OPEN switch
(item 3 on page 6), the front panel to open the DVD door and put a disc on the loader,
with the label side facing up. For double-sided DVD discs, mount the disc with the "A1"
label (the Side 1 equivalent label) facing up.
if it is a DVD disc, it will start playing automatically, typically showing either the
Menu/Title Page on the screen or previews of coming attractions.
if it is a CD, it will play the first track directly.
The PAUSE function (II) isinitiated by pressing the PAUSE button (item 7 on page 6
/ item 17 on page 7).
For DVDs, pressing PAUSE causes the picture to freeze and the sound to cease.
For CD audio discs, pressing PAUSE causes the sound to pause and bemuted.
Press the PLAY/ENTER button again to resume normal play.
Each press of this key advances the video content by a small interval. The audio is
silent.
Cancel the PAUSE or STEP function by pressing PLAY.
Press the SETUP button (item 6 on page 6 / item 6 on page 7) to display the Setup
Menu.
Along the top of the initial display are four icons, each representing one of the four
categories listed above. By using the left [ ] or right [ ] direction keys (item 10
on page 6 / item 5 on page 7) , it is possible to highlight the desired category,
whose name will also be displayed in yellow type below the icons.
The following section will cover all four configuration categories and their settings.
Press the STOP button (item 8 on page 6 / item 18 on page 7) once if you want invoke the
PRE-STOP mode. PRE-STOP stops the playback, displays the manufacturer s logo, and
allows playback to be resumed from the point at which STOP was pressed--simply by
pressing the PLAY/ENTER button (item 7 on page 6 / item 4 on page 7). PRE-STOP is
very similar to PAUSE, except that PAUSE freezes the existing video on the screen, while
PRE-STOP replaces it with the aforementioned logo.
Pressing the STOP button twice
completely stops the disc, and causes the unit to enter the
STOP mode, where the disc ceases to spin, and playback can no longer be resumed from
the point at which the STOP button was pressed.
The STEP function (available only on the remote control (item
17
on page 7) is
activated only after PAUSE is invoked.
Setup Mode provides the menus for the configuration of the SYSTEM SETUP,
LANGUAGE SETUP, VIDEO SETUP, and SPEAKER SETUP categories.
7.
