Page 4
In MMC/SD, USB mode, the file name, folder name, song
’
s title, artist and album
information will be scrolling on the LCD display.
As long as the current playing MP3/WMA music contains relevant ID3 tag
information in version 1.0/2.0 format, the 3 items underlined above will be scrolling
on the LCD display; otherwise, they will not.
16. MODE BUTTON
Press the MODE button to change among tuner (radio), disc (when a disc is loaded),
MMC/SD card (when an MMC/SD card is inserted) , USB (when an USB stick is
inserted) and AUX mode.
17. EJECT KEY
In the power on state, the loaded disc can be ejected by pressing the EJ key.
18. TA [TRAFFIC ANNOUNCEMENT] BUTTON
When press the button, it is activated as TA mode on or off.
When TA mode is on(TA is displayed on LCD), it will begin to seek TA station and
TA SEEK will be displayed on LCD for a while.
When traffic announcement is transmitted:
1). If the unit is in MMC/SD, USB mode, it will switch to radio mode temporarily.
2). If volume level is below 20, volume level is raised to 20, and returns to its previous
mode and volume level when the traffic announcement is over.
If volume is adjusted during traffic announcement, only the traffic announcement
volume is valid.
* TA interruption function:
The current traffic announcement is cancelled by pressing this key. But the TA mode
will not be off.
* When TA is on, SEEK, (SCAN), AUTO MEMORY function can be received or saved
only when traffic program identification code has been received.
When TA is ON, traffic program identification code is not received during specified time.
19
. AS/PS BUTTON (Auto-storage /Preset scan)
During radio mode:
1) when press and hold for more than 1 second, the radio searches from the current
frequency and checks the signal strength level until 6 station are found. And then
the 6 stations frequency are preset to the corresponding preset memory numbered
bank. The auto-storage operation is implemented in the each selected band.
When the auto-storage operation is finished, the radio execute the Preset Scan.
2) when press briefly, the radio searches for each preset station in the current
band and holds at that preset number for 5 seconds with releasing mute, and
then search again.
During MP3/WMA file in disc, MMC/SD or USB mode:
1) In TRACK SEARCH mode, the LCD will display TRK T 000 and flash the biggest
digit 0 that the SD/MMC card or USBstick contain. (if the number of tracks is less
than 100 and more than 9, it will be TRK 00) Then press the VOL+ or VOL- button
to select the number of the flashing digit from 0 ~ 9. Then press SEL button to
confirm the number and flash next smaller digit 0.
With the same means, select the number of the flashing digit. After finishing
selecting the number of all flashing digit, press SEL button to play the track of
the selected serial number.
2) In FIRST CHARACTER SEARCH mode, the LCD will display A--......, If there
are files names its first character are A , the ......is the first file name its first
character is A by the order of A~Z and 0~9; otherwise, the ......is NONE. Then
press the VOL+ or VOL- button to select file
’
s first character by the order of
Page 7
TROUBLE SHOOTING
Before using the check list please make all the connections first.
If you still have questions after going through the checklist, please consult
your local customer service representative.
Common Symptoms
There is no power.
The CDs cannot
be loaded.
Cause
The fuse has blown.
Presence of CD disc inside the player
Inserting the disc in upside down
The surface of CD is extremely dirty
or it is damaged.
Temperature inside the car is too
high.
The volume control is set too low.
There is no sound.
The operation keys
do not work
The sound of the
CD player skips
The antenna cable is not connected. Insert the antenna cable firmly into the
antenna socket of the device.
No radio reception.
1.The built-in microcomputer is not
operating properly due to noise
2.Front panel is not properly fix into
its place
1. Switch the device off and on again. Or press
the RESET button to resume the program.
2. Reinstall the front panel
The device has not been correctly
connected.
The installation angle is more than
30 degrees
Wait until the road becomes smoother before
playing the CD.
Adjust the installation angle to less than 30
degrees
Turn up the volume properly.
Check the power and earth connection
according to the wiring diagram.
Cool off until the ambient temperature returns
to normal
Clean the CD or try another CD, if this works
correctly, the first CD is properly damaged.
Insert the compact disc with the label facing
upward
Remove the disc in the player then put a new
upward
Replace another fuse according to the wiring
diagram.
The car ignition is switched off.
If the power supply is properly connected to
the car accessory, switch the ignition key to
ON or " ACC
"
"
" .
Solution
The device does
not work correctly
(EJECT, LOAD,
PLAY)
In automatic search
mode the radio does
not stop at a trans-
mitting station.
Tune in to a radio station manually.
The transmission signals are too
weak.
The CDs are loaded
only halfway into
the CD tray.
The transport screws have not been
removed.
Remove the transport screws before using.
The surface of the road is uneven.
The surface of CD is extremely dirty
or it is damaged.
Clean the CD or try another CD, if this works
correctly, the first CD is properly damaged.