GB - 9
DC IN 12V
POWER
OFF ON
AC adapter (EA10362)
Left side of unit
3
Power indicator
1
To DC IN 12V jack
2
AC power
cord
To AC outlet
To AC adapter
DC IN 12V
POWER
OFF ON
SCREEN VIEWING ANGLE ADJUSTMENT
The Monitor is designed to allow users to have a comfortable viewing angle. The
viewing angle can be ad/- 12°.
• Gently push the top or bottom of the screen frame to adjust the viewing angle.
Caution:
• Do not force the screen frame over its maximum viewing angle or damage to the
unit could result.
POWER SUPPLY
A. Using the car plug adapter
The included 12V car plug adapter is designed for use with vehicles that have a 12V, negative ground
electrical system.
Cautions:
• Use this unit only with the included 12V car plug adaptor. Use with other car adaptors could damage the system.
• The included 12V car plug adaptor is for use with this unit only. Do not use it with other equipment.
• Do not operate the unit or watch videos while driving a vehicle.
• Make sure the unit is secured correctly to prevent it from falling inside the vehicle in the event of an accident.
• When the inside of the 12V car socket is dirty with ashes or dust, the plug section may become hot due to poor
contact. Be sure to clean the 12V car socket before use.
• After use, disconnect the 12V car plug adaptor from both the unit and 12V car socket.
• Check your local traffic laws for rules governing the use of video devices in vehicles.
12V car plug adapter
Left side of unit
1
To DC IN 12V jack
2
To the 12V car socket
B. Using the AC adapter (optional)
This unit can be powered by connecting an optional AC adapter.
An AC Adapter, please note, the only AC adapter suitable for this unit is DC 12V 3.0A, with plus center
polarity
. Please check voltage before buying an AC adapter.
Cautions:
• Use of an incorrect type AC adapter
will damage the unit.
• Turn off the unit before unplugging
the AC adapter from the unit so as to
avoid the unit being damaged.
• The mains plug is used as the
disconnect device, the disconnect
device shall remain readily operable.
• When the unit is not going to be used
for long time, disconnect the AC
power supply cord from the AC outlet.
Important:
• Be sure to use it near the wall outlet. If a malfunction occurs, disconnect the plug from the wall outlet at once.
• When the AC Power supply cord is connected, the power indicator on the AC adapter will remain on although the
unit is turned off. Disconnect the AC power supply cord from the AC outlet when not in use.
• When the adapter is plugged in, the apparatus is not completely disconnected from the main, even when the power
is turned off.
GB_05-09_g_V6_AKAI.pmd
5/4/2005, 10:59 AM
9
