10
SEARCHING FOR RADIO STATIONS
•
To search for radio stations, firstly ensure
that the radio function is turned ON and is
set to your desired band (AM or FM).
•
You can perform an auto search where
the tuner will automatically search up or
down the frequency range and stop on the
first available station. To do this press and
hold either
or
buttons until you
notice the frequencies display on screen
start to change. After the tuner stops on
the first available station, you can repeat
the process until you reach your desired
station.
•
Pressing the
will perform an auto
search down the frequency range. Pressing
the
will perform an auto search up the
frequency range.
•
You can perform a manual search to find
your desired radio station. To do this,
simply repeatedly press (do not hold) either
the
or
buttons to search up or
down the frequency range until you reach
the desired frequency/radio station.
USING THE RADIO STATION PRESET MEMORY
The Jumbo Alarm Clock Radio has a 20 station
memory for the FM and AM tuners. You can save
your favorite stations into the memory of the
Jumbo Alarm Clock Radio so you can quickly
tune to these stations. These presets can be
overwritten at any time.
1. Tune the radio to your desired station (refer
to page 9 for instructions).
2. Press and HOLD the M Button until ‘P01’
begins to flash on screen.
3. Press either the
or
buttons to
select the preset you would like to save this
to (from 1 – 20). Once you have reached
your desired preset press the M Button
once to save.
4. You can overwrite any preset at any time
by following the previous procedure and
ensuring you select the correct preset to
overwrite with a NEW station.
5. If you would like switch to one of your
saved radio stations, simply press the M
button until ‘P01’ is displayed (assuming
that you are listening to the station saved
in the first preset). Press either the
or
buttons to move up or down
your preset list. The saved stations will
automatically play as soon as they are
selected. After a few seconds, the Jumbo
Alarm Clock Radio will display the time on
screen once again.
USING THE SLEEP FUNCTION
The Jumbo Alarm Clock Radio has sleep
function which enables you to listen to the radio
for a selected period of time before the Jumbo
Alarm Clock Radio will automatically turn the
radio off.
1. When listening to the radio on your Jumbo
Alarm Clock Radio, press and hold the
SNOOZE/SLEEP button until ‘120’ is
displayed on screen.
2. ‘120’ represents the number of minutes
you would like your radio to continue to
play before it turns itself off. You can press
the snooze button repeatedly until you read
your desired minute setting.