Akai A60021, Инструкция по эксплуатации

Страница: 6 / 12

6
USING YOUR APPLIANCE
BEFORE FIRST USE
1. Remove the parts from the packaging.
2. Assemble as instructed in the
assembly page.
3. Your appliance is now ready for normal
use.
4. Dispose of the packaging in a
responsible manner.
HOW TO POSITION THE TURNTABLE
Ensure that the product is placed on a
flat level surface in a dust free, cool, dry
environment with good ventilation and
where it cannot be knocked or bumped and
the power cable will not cause a trip hazard.
MAINS CONNECTION
1. Ensure that the mains voltage of your
home corresponds to the operating
voltage of the adaptor.
2. Connect the DC connector to the DC
Power jack on the unit.
3. Plug in the power adaptor to the mains
socket.
SPEAKER/AMPLIFIER CONNECTION
You may connect the supplied external
speakers or an amplifier to listen to your
records.
Follow the steps below:
Connect the audio plugs to the line input on
your mixer or amplifier using an RCA cable
(not supplied).
• Red plug into r/h channel input.
• White plug into l/h channel input.
PLAYING A RECORD
1. Place the record of your choice on the
turntable. If it is a 45rpm, do not forget
to place the adapter on the record
spindle.
2. Remove the protective cover from the
stylus cartridge.
3. Turn on the turntable using the Power/
Volume Knob.
4. Choose the desired playing speed using
the Speed Selector to switch between
33.3, 45 and 78rpm.
5. Release the tone arm lock.
6. Push in the arm lightly with your hand.
7. Place the stylus vertically over the first
track of the record, and the turntable
will start turning automatically.
8. Slowly put the stylus down on the
record to play.
9. Once the tone arm reaches the end
of the record at the centre of the
turntable, playback will stop. Lift up the
tone arm and put it on the rest when
finished.
Note: The record should automatically stop
when it comes to an end. If the turntable
does not shut off, turn off the power with
the On/Off Volume Dial.
Note: If your record stops before the last
track finishes, you will have to manually
restart playback.
10. When a record comes to the end, the
turntable will stop automatically if the
Auto Stop switch is in the ON position.
If the switch is in the off position then it
will be suitable for Long Play records.
11. Replace the protective cap on the stylus
and close the tone arm lock.
12. Turn off the power with the Power/
Volume knob, and unplug the device at
the Mains.