7
USING YOUR APPLIANCE
BEFORE FIRST USE:
•
Remove the product from the box.
•
Remove any packaging from the
product.
•
Please retain all packaging until you
have checked and counted all the parts
and the contents against the parts list.
•
Your appliance is now ready for normal
use.
POWERING ON AND CHARGING THE
BATTERY:
This unit is equipped with a rechargeable
battery, and can be charged through the
included DC5V/USB charging port.
1. Insert the micro-USB end of the
included USB cable into the DC5V port
at the back of the speaker and the other
into a compatible mains adaptor or USB
port. A red LED light will come on in
the unit’s control panel to indicate the
device is charging.
NOTE:
It’s recommended to fully charge the
battery before first use. It should take 4-6
hours for the battery to charge in full.
2. Once the device has finished charging,
the red light will turn off.
3. When the device has finished charging,
unplug the USB cable from the unit.
4. If charging through a USB adaptor,
take care to switch the mains outlet off
before removing the cable.
5. If charging through a laptop or similar
device, take care to unmount the USB
cable before removing it from the unit.
To unmount the USB cable, use the
device management menu on your
laptop or computer.
TURNING THE LED EFFECT ON/OFF:
This unit is equipped with a multi-coloured
LED effect which changes in time to the
music, and which can be manually turned off
or back on at any time.
1. Long-press the ‘Mode’ button while
the LED light show is active to turn the
effect off.
2. Long-press this button again while the
light show is deactivated to turn it back
on.
CONNECTING A MICROPHONE TO THE
UNIT:
This unit can also be used as an external
audio output source for microphones and
other voice-amplifying devices.
1. Use the ‘Mic’ jack located at the front
of the unit to connect a microphone or
similar external device to it.
ADJUSTING PLAYBACK VOLUME:
1. Rotate the volume dial on the unit’s
control panel to adjust playback output
volume. Rotate this dial clockwise to
increase playback volume, or counter-
clockwise to decrease it.
PLAYBACK CONTROLS:
Use the Previous, Next, Play/Pause and
Mode buttons to control playback when the
unit is in operation.
1. Short-press the Previous button to skip
back to the start of a track. Short-press
it again once the track has started over
to skip to the previous track on the
playlist. Short-press the Next button
to skip forward to the next track on a
playlist.
2. Press the Play/Pause button when audio
is playing to stop or pause playback.
Press this button again when playback
is stopped to resume it.