AK-NORD XT-PICO-XXL, Руководство пользователя

Страница: 32 / 39

1 = Emulation
This is the same option as in the TTLIO Config menu
2 = EmuCode
This is the same option as in the TTLIO Config menu
3 = Setup Timeout
Determines how long it will be tried to establish a connection to the target if
it is not immediately accessible
Example: 3=10
4 = Selection (M/S)
Using this setting, it is possible to choose between the connection types
SINGLE and MULTI. SINGLE means that the data will be transmitted to the
first target which is entered in the list, if it is available. If the first target is not
available, the device will try to connect itself to the second target and then to
the third target, etc. In doing so, the Setup Timeout means how long it is
being tried to connect the device to the corresponding target. In the
operating mode MULTI, the data will be transmitted to all targets at a time.
Example: 4=M
5 = Mode (C/A/T)
Here it is possible to select the operating mode. This will influence the mode
only for the emulation TCP and UDPCLIENT. The peculiarities of the single
options are described in the chapter “Emulations (operating modes)” of the
main manual.
Example:
5=C
a = DNS/IP:PORT
Using this setting, you can determine the 1
st
target address (IP or DNS) and
the first TARGET PORT if you use the TCP or UDPCLIENT emulation.
TARGET address and TARGET PORT will be separated by a colon.
All data which are incoming on the serial interface will be automatically sent
to the entered target.
Example:
a=192.168.0.2:6000
b = DNS/IP:PORT
c = DNS/IP:PORT
d = DNS/IP:PORT
e = DNS/IP:PORT
f = DNS/IP:PORT
g = DNS/IP:PORT
h = DNS/IP:PORT
i = DNS/IP:PORT
j = DNS/IP:PORT
=========================== TTLIO Connection Menu ===========================
1 = Emulation = TCPSERVER
2 = EmuCode = 0000
3 = Setup Timeout = 10 (*100ms)
4 = Selection (M/S) = S (Single)
5 = Mode (C/A/T) = A (AutoConnect)
a = DNS/IP:PORT =
b = DNS/IP:PORT =
c = DNS/IP:PORT =
d = DNS/IP:PORT =
e = DNS/IP:PORT =
f = DNS/IP:PORT =
g = DNS/IP:PORT =
h = DNS/IP:PORT =
i = DNS/IP:PORT =
j = DNS/IP:PORT =
For example:'a=192.168.10.2:4000'
-----------------------------------------------------------------------------
[Q = QUIT] Please enter your choice:
With the options “b“ to “j“ it is possible to determine other
TARGET addresses. In the MULTI mode all addresses will be
opened at a time and the data will be sent. It is possible to
process 10 targets at a time. In the SINGLE mode the other
TARGETS will be addressed one after another if the first one
is not available.