Manual configuration
Requirements:
PC / Laptop with a serial interface.
1.)
Please install our tool XT-ADMIN-XXL. You will either find it on our
homepage
www.ak-nord.de
or on the CD-ROM included in our
delivery.
2.)
Connect the SER2USB cable to the PC / laptop (COM).
3.)
Start
“XT-ADMIN-XXL”
,select
“XT-Serial”
,configure the serial
interface of the PC / laptop to the following values:
Baud rate
= 115200
Data bits
= 8
Parity
= None
Stopbits
= One
Handshake
=
None
and then press “
Open
” .
SER2USB
Cable
3
1
2
4
3
-----------------------------------------------------------------------------
----------------------------- C O N S O L E ---------------------------------
-----------------------------------------------------------------------------
A = BAUD RATE Auto
B = BAUD RATE 2400
C = BAUD RATE 4800
D = BAUD RATE 9600
……
……
P = Show printer info
S = Save all values and restart
Q = Quit without any changes
Interface settings
Settings : 9600,8,N,1
Protocol : RTS/CTS
-----------------------------------------------------------------------------
Please enter your choice:
5
1
2
4
