transponder.
To install a transponder:
After installation, be sure to check the vhfBridge tamper status in the Ajax app.
Do not install vhfBridge:
1. Secure the body to the surface with bundled screws using at least two xing
points. In order for the integration module tamper to respond to a
dismantling attempt, be sure to x the body at the point with the perforated
section.
2. Install the vhfBridge card into the body on the racks. If available, connect a
backup battery. Note that a power supply should not be connected to the
terminals.
We recommend using a 12 V battery with a capacity of 4 or 7 Ah. For such
batteries, special racks in the body are designed. You can also use similar batteries
of a different capacity, of matching size, with the maximum full charge time of no
more than 30 hours. The maximum battery size for installation in the body is 150 ×
64 × 94 mm.
3. Connect the VHF transmitter to vhfBridge.
4. Turn on vhfBridge.
5. Install the lid on the body and x it with the bundled screws.
Outdoors. Doing so may cause the device to malfunction or not work
properly.
Near metal objects or mirrors (for example, in a metal cabinet) They can
shield and attenuate the radio signal.
Inside premises with temperature and humidity outside the permissible
limits. Doing so may cause the device to malfunction or not work properly
