AJAX Segma, Руководство пользователя

Страница: 38 / 42

38
Charging the battery
Charge the battery before using it for the first
time or when it has been unused for extended
periods .
Use only AJAX-approved chargers, batteries, and
cables .
Unapproved chargers or cables can cause the
battery to explode or damage the device .
• Connecting the charger improperly may cause
serious damage to the device .
Any damage caused by misuse is not covered by
the warranty .
• Use only cable supplied with the device . The
device may be damaged if you use different
cable .
To save energy, unplug the charger when not in
use .
The charger does not have a power switch, so you
must unplug the charger from the electric socket
when not in use to avoid wasting power .
The charger should remain close to the electric
socket and easily accessible while charging .
1
Plug the DC cable into the device’s Charge jack .
2
Plug the power adapter into an electric socket .
3
After fully charging, disconnect the charger
from the device .
Then, unplug the charger from the electric socket .
Battery
Precautions for operating environment
Your device may heat up due to the environment
in the following conditions .
Use caution to avoid shortening the battery’s
lifespan, damaging the device, or causing a fire .
• Do not store your device in very cold or very
hot temperatures .
• Do not expose your device to direct sunlight
for extended periods .
• Do not use or store your device for extended
periods in very hot areas, such as inside a car in
the summertime .
• Do not place the device in any areas that may
overheat, such as on an electric heating mat .
• Do not store your device near or in heaters,
microwaves, hot cooking equipment, or high
pressure containers .
• Never use a damaged charger or battery .