the type of CMS and the selected protocol for communication with the
monitoring station.
The device ID, the loop (zone) number, and the bus number can be found in its
Detector placement
When choosing the place to install KeyPad Fibra, take into account the
parameters that affect the correct operation of the keypad: Fibra signal strength
and connection cable length.
Consider the placement recommendations when designing your facility’s
security system. Design and installation of the security system should be
carried out by professionals. A list of authorized o cial Ajax partners is
KeyPad Fibra is best placed indoors near the entrance. This allows disarming
the system before the entry delay has expired, as well as quickly arming the
system when leaving the premises.
When holding KeyPad Fibra in your hands or using it on a table, we cannot guarantee
that the touch buttons will work properly.
It is a good practice to install the keypad
1.3–1.5 meters above the oor
for
convenience. Install the device on a at, vertical surface. For example, on the
wall. This allows KeyPad Fibra to be rmly attached to the surface and to avoid
false tamper triggering.
Design and preparation
For the system to work correctly, it is important to properly design the project
and install all devices correctly. Failure to follow the basic installation rules and
recommendations of this manual may result in detector malfunction, false
alarms, or loss of connection with already installed devices.