AJAX DualCurtain Outdoor, Руководство пользователя

Страница: 11 / 34

To make sure DualCurtain Outdoor is connected to the hub, the detector must be located at
the same secured facility as the system (within the range of the hub’s radio network).
The connected detector will appear in the list of hub devices in the Ajax app. Device
statuses updating in the list depends on the Jeweller settings; the default value is
36 seconds.
If the connection failed, try again after 5 seconds. If the maximum number of
devices has already been added to the hub, you will be noti ed when you try to add
a new one.
DualCurtain Outdoor works only with one Ajax hub. When connected to a new hub, the
detector stops sending commands to the old one. Once added to a new hub, DualCurtain
Outdoor is not removed from the device list of the old hub. This must be done in the Ajax
app.
Icons
The icons represent some of DualCurtain Outdoor statuses. You can see them in
the Devices tab, in the Ajax app.
Icon Value
Jeweller signal strength between the hub (or a ReX range extender) and the
detector
1. Open the Ajax app. If your account has access to multiple hubs, select the one
to which you want to add DualCurtain Outdoor.
2. Go to the Devices menu and click Add Device.
3. Name the detector, scan or type in the QR code (placed on the detector body
and the packaging), select a room and a group (if the group mode is enabled).
4. Click Add; the countdown will begin.
5. Switch on the device by holding the power button for 3 seconds.