08/07/21, 20
:
24
DoubleButton User Manual | Ajax Systems Support
Página 5 de 19
https://support.ajax.systems/en/manuals/doublebutton/
How to connect DoubleButton to a hub
To connect DoubleButton to a hub, it should be located on the same
protected object as the system (within the hub’s radio network range). If
the connection fails, try again in 5 seconds.
DoubleButton can be connected to one hub only. When connected to
a new hub, the device stops sending commands to the old hub.
Added to a new hub, DoubleButton is not removed from the device
list of the old hub. This must be done manually in the Ajax app.
Updating the device statuses in the list occurs only when DoubleButton is
pressed and does not depend on the Jeweller settings.
States
1.
Open the Ajax app. If your account has access to several hubs,
select the hub to which you want to connect the device.
2.
Go to the
Devices
tab and click
Add device
.
3.
Name the device, scan or enter the
QR code
(located on the
package), select a room and a group (if group mode is enabled).
4.
Click
Add
— the countdown will begin.
5.
Hold any of two buttons for 7 seconds. After adding
DoubleButton, its LED will `ash green once. DoubleButton will
appear in the list of hub devices in the app.
