26.03.2022 13.55
CombiProtect User Manual | Ajax Systems Support
Side 4 af 21
https://support.ajax.systems/en/manuals/combiprotect/
?
_ga=2.171224166.754703337.1648293156-504169808.1647685641
After actuation, the armed detector immediately transmits an alarm
signal to the hub, activating the sirens and notifying the user and
security company.
If before arming the system, the detector has detected motion, it will
not arm immediately, but during the next inquiry by the hub.
Connecting the Detector to the Ajax
security system
The detector is connected to the hub and set up via the Ajax Security
system mobile application. To establish connection please locate
the detector and the hub within the communication range and follow
the device adding procedure.
Before starting connection:
Only users with administrator rights can add the device to the hub
1.
Following the hub manual recommendations, install the
. Create an account, add the hub to the application,
and create at least one room.
2.
Switch on the hub and check the internet connection (via
Ethernet cable and/or GSM network).
3.
Ensure that the Hub is disarmed and does not update by
checking its status in the mobile application.
