Geofence
— a reminder of arming/disarming the security system from the
intrusion detection mode, if a specific zone is crossed.
User location is determined based on the data of the GPS antenna and iBeacon beacons (only
for Apple equipment).
Groups
— groups mode settings.
Detection zone test
— testing the detection zone of the devices
connected to the Hub.
Jeweller
— identification of the Hub-detector inquiry interval and the
number of undelivered data packets.
The inquiry interval of the detectors by the Hub determines how frequently
the devices exchange data. The smaller the interval is (in seconds), the
quicker the Hub learns about events of the connected devices and the
devices receive commands from the Hub. The value of the number of
undelivered packets determines how quickly the Hub learns about the loss
of the connected device.
Calculation of the time for giving the alarm (with the default
parameters):
(8 p 1 corrective) x 36 seconds inquiry interval = 5 minutes 24
seconds
At that, information about any alarm or sabotage is transmitted
immediately. We should keep in mind that the small interval limits the
maximum number of connected devices:
Interval
Connection limit
12 seconds
39 devices
24 seconds
79 devices
36 and more seconds
100 devices
Service
— a group of service settings of the Hub.
Connection failure alarm delay
— time period regulating the delay of
notification of the lost communication with the server.
Server ping interval
— the interval of sending pings from the Hub to the
server.
