AJAX AJ-FIRE, Руководство пользователя

Страница: 9 / 20

Temporary Deactivation
Note that a disabled device does not trigger an
interconnected alarm of
fi re detectors. But if
smoke is detected, the built-in siren will sound
User Guide Opens the detector User Guide
Unpair Device Deletes device and its settings
The function activates built-in sirens of all fi re detectors if at least one of them is
triggered. Sirens are activated within the hub–detector ping interval according to
the Jeweller settings.
To enable Interconnected Alarms:
1. Open the Devices tab in the
2. Select a hub
3. Go to its
Settings by pressing
4. Select the Service item
5. Go to the Fire detectors settings menu and activate the Interconnected
FireProtect Alarms option
Interconnected alarms are supported by FireProtect and FireProtect Plus detectors with
fi rmware versions 3.42 and later. Please note that when you turn on the interconnected
alarms, you cannot set the hub–detector ping interval (Jeweller settings) of more than 48
seconds.
Lid only — the system will ignore only
noti fi cations about the triggering of the
device tamper button