Alarm Duration (sec)
Settling the time of the siren alarm (from 3 to 180 seconds per
alarm)
Alarm if moved
If active, the accelerometer reacts to moving or tearing off
from the surface
Armed mode indication
If activated, the siren LED blinks once every 2 seconds when the
security system is armed
Beep when arming/disarming
If activated, the siren indicates arming and disarming by LED
frame blink and a short sound signal
Beep on delay
If activated, the siren will beep delays (available from
3.50 FW
version
)
Beep Volume
Selecting the volume level of the siren beeper when notifying
about arming/disarming or delays
Volume test
Starting the siren volume test
Jeweller Signal Strength Test
Switching the device to the signal strength test mode
Attenuation Test
Switching the siren to the signal fade test mode (available in
devices with
firmware version 3.50 and later
)
User Guide
Opens the siren User Guide
Un pair Device
Disconnects the siren from the hub and deletes its settings
Indication
Event
Indication
Alarm
Emits an acoustic signal (the duration depends on the settings)
and the LED frame blinks red
Switching on
The LED frame blinks once
