In order for detection and interfacing to occur, ReX must be located within radio
communication range of the hub (on the same guarded facility).
The request for connection to the hub is transmitted for a short time at the time
of switching on the device. If the connection to the hub fails, turn off the
extender by pressing the power button for 3 seconds and retry the connection
procedure after 5 seconds.
The extender connected to the hub will appear in the list of hub devices in the
application. The updating of device statuses in the list depends on the polling
time set in the hub settings; the default value is 36 seconds.
1.
Go to the ReX settings (Devices
→
ReX
→
Settings
).
2.
Press
Pair with device
.
3.
Choose the devices that should operate via the extender.
4.
Go back to the ReX settings menu.
