AJA ROI Converter v2.1
www.aja.com
11
Running MiniConfig
Connect the Mini-Converter to the PC or Mac via the supplied USB cable. Connect the
external power supply (supplied) to the Mini-Converter.
NOTE:
On a Mac, when the Mini-Converter is connected to the USB port, you may see an alert like
that shown following. If you do, press Cancel—this alert can be ignored.
PC Startup:
To run MiniConfig on a PC, find the AJA MiniConfig in the program list and locate the AJA
folder and the MiniConfig application inside.
Mac Startup:
To run MiniConfig on a Mac, double-click the Applications folder and locate the AJA
MiniConfig application. Double-click the application to launch it.
Saving Setups:
A
File
menu at the top of the MiniConfig
application menu bar allows you to
Save
the
state of the Mini-Converter, with your current
settings, to a file for later recall. This allows you
to set up the converter for different
applications, storing each configuration (with
Save) to a unique name for easy recall with the
Open
menu item. A
Revert to Factory Settings
menu item similarly allows you to change
the settings back to AJA’s factory defaults. An Edit menu allows you to cut and paste
values to/from fields, just as in other applications.
Operating
MiniConfig
The MiniConfig application provides a graphic interface for viewing settings and
updating software. It consists of an information area at the top that shows the available
Mini-Converters attached to the computer via USB, with a graphical rendering of the
selected Mini-Converter showing all the connectors and their current state.
Colored text next to the connectors indicates the signal type and what the Mini-
Converter is doing: